| Usage: aticonfig [OPTION] ... Parses an existing X-Server configuration file and modifies it to operate with ATI products. The following command-line options can be invoked as parameters: ATI Initial Configuration: --initial Generate a default ATI device section in the configuration file which is capable of loading the fglrx driver. --initial=dual-head Same as '--initial' but generate a basic dual head configuration file. --initial=check Identifies if the fglrx driver is present in configuration file. TV Options: --tvf, --tv-format-type=STRING Change the TV signal format. STRING can be one of: NTSC-M NTSC-JPN NTSC-N PAL-B PAL-COMB-N PAL-D PAL-G PAL-H PAL-I PAL-K PAL-K1 PAL-L PAL-M PAL-N PAL-SECAM-D PAL-SECAM-K PAL-SECAM-K1 PAL-SECAM-L Note: Not all graphics cards support every mode. Regional settings are applicable. --tvs, --tv-standard-type=STRING Change the TV standard for TV output. STRING can be one of: VIDEO SCART YUV --tv-overscan={on|off} Enable or disable overscan mode for TVout Note, not all tv-formats support overscan. Try to toggle overscan off before changing tv-format if and error occurs. --tv-info Print out the current tv geometry, tv format, and if the tv is physically connected. |
"Hi i have same graphics card and it can also give out PAL signals although the default settings are NTSC . You can go into the Display Properties ->settings->advance->dispay->double click on TV tab . You can change the setting from here"the Display Properties ->settings->advance->dispay-> jusqu’à la Ok, mais après je vois pas de quoi il parle: