Gamoover
Forums " WORKSHOP" => Jeux : Pcb & Systèmes arcadiens => : glstar Monday 05 October 2015, 13:02:59 PM
-
Hi.
I have a Zero Gunner 2 cart with IC7-IC8 BAD.
Seems that the problem is related to the mpr-23687 IC4.
Since this is a masked rom, could someone tell me what i can use as replacement chip?
-
(http://www.onedigitallife.com/images/barack-obama-yes-we-can.jpg)
-
(http://www.onedigitallife.com/images/barack-obama-yes-we-can.jpg)
Oh well....
:)
So what can i use???
-
Its tsop48 128Mb,right ?
Equivalent arent plug and play,you need to modify à little bit
-
Its tsop48 128Mb,right ?
Equivalent arent plug and play,you need to modify à little bit
It should be 64mbit 48 pin tsop.
-
MX26L6420 are OK for that capacity.
Just be sure to add an resistor or 2 diodes in serial since mx are running at 3.3v and originals maskrom runs at 5v
-
This is the cart:
(http://i1372.photobucket.com/albums/ag327/glstar7/039C841E-F1BE-481F-84F7-08B787C7D770_zpsb6a9p1xg.jpg)
This is the maskrom chip that should be bad:
(http://i1372.photobucket.com/albums/ag327/glstar7/63EAA791-AFB8-4DD7-B5F7-5DDC61997442_zpszzojd1nq.jpg)
This is some measurement made on the chip:
(http://i1372.photobucket.com/albums/ag327/glstar7/049D670F-0E13-4894-9F63-3654B0F58E6A_zpsm37xsrcz.jpg)
How to check if the maskrom is really bad?
How can i read this one?
Which is the rom (or other) i can use to replace it?
-
Just for information...
This is what Guru tell me about this problem....
they are 128M.
there is only one equivalent.
it is OKI MR27V12800J
-
Its tsop48 128Mb,right ?
Equivalent arent plug and play,you need to modify à little bit
That what I was thinking about but since you told me there are 64mb.
Thanks for your information about equivalent BTW ^-