Voir les contributions

Cette section vous permet de consulter les contributions (messages, sujets et fichiers joints) d'un utilisateur. Vous ne pourrez voir que les contributions des zones auxquelles vous avez accès.


Messages - RetroRepair

Pages: [1] 2
1
Simulateurs / Scan Sticker sega touring car
« le: Dimanche 02 Février 2014, 13:04:19 pm »
CHEck the archive I posted above, the touring car logo is in there.

Good work anyway  ^-

2
Simulateurs / Scan Sticker sega touring car
« le: Samedi 01 Février 2014, 20:26:20 pm »
Here's some art I made for my cab a few years ago, only seat 1 and 2 I'm afraid. As far as I can tell they are pretty accurate.

I have a vinyl cutter so I cut them with that, looked real nice on the seat!

http://www.sendspace.com/file/tkoo8d

3
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Jeudi 29 Septembre 2011, 03:15:21 am »
Here's my setup with Daytona, Scud Race, Ridge Racer 2 and Outrun demos :

WARNING: The video somehow got away from me and turned into a 25 minute epic!  :-X

4
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Jeudi 15 Septembre 2011, 02:41:03 am »
For those wondering, to get all the effects working correctly in Daytona I had to set the clutch effect in nebula ini to 0.5

Now I can feel all car impacts, wall hits and grass vibration perfectly, every time  ^-^

5
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Jeudi 15 Septembre 2011, 00:10:15 am »
I hadn't replaced R6.. works great now!  :-)=

Thanks for the help again!!  <:)

Now to figure out settings.. this may take a while  ;)

6
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 23:37:36 pm »
I replaced all of those with no effect  :'(

I've replaced almost everything now. I don't understand  =?=

7
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 19:20:21 pm »
I already did that, it's the same  :'(

8
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 19:00:57 pm »
Ok well RV3 works fine but RV2 doesn't change anything  >:(

I changed it for a new pot and still is constantly at full power. I need two hands to pull it all the way round!! It does measure the correct 12.5v when I adjust it.

I guess something is blown or incorrect with my circuit. It couldn't be due to the 10uf cap on the clutch output?

9
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 18:18:57 pm »
Aaahh got it  ^-

That's for clutch power?

I will have a go at adjusting them then  ;)

10
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 16:46:51 pm »
Citer
You can adjust the power between right and left with rv2 or rv3, be carefull, you must never adjust under 12,5v.

They are both already at 12.5v exactly.

It sounds like the clutch is locking completely as there is no "washing machine" sound when I turn the wheel to the right and it's very hard to turn? It's fine when I turn left.

Adjusting RV4 doesn't make it much less powerful on that side.

11
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 12:06:41 pm »
Citer
Does the capacitor has resolved this issue ?

Yes  ^-

12
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mercredi 14 Septembre 2011, 00:45:39 am »
One more quick question, the feedback is very strong in one direction but feels a softer in the other. What should I adjust to fix this? The strong direction actually feels too strong, like the clutch is locking up.

As I understand, I should be keeping the pots at the same levels?

13
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mardi 13 Septembre 2011, 23:48:33 pm »
The 10uf cap did it  ^-^

WOW it's powerful!! I'm going to have to play with the settings but it works great, thanks!!  :-)=

I'll upload a video soon to youtube with the results.

Thanks again aganyte  :-*

14
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mardi 13 Septembre 2011, 22:45:10 pm »
I have pins 1-3 and 5-7 bridged where U7 should be, is that right for normal operation?

Also, should R3, R4, R5, R6, R7, R8, R9, R10, R15 be 220 ohms or 220k? There is conflicting information in this thread!

15
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Mardi 13 Septembre 2011, 22:15:14 pm »
I built this circuit and got it all hooked up today finally  8)

I have a problem though.

It all seems to function correctly and I set the pots at 20v and 12.5v but the clutch is very soft. It hardly grips at all. The motor doesn't seem to be strong either.

All the feedback effects seem to be correct, just very weak.

Adjusting RV4 does nothing at all. I replaced TIP122 and no change.

When I measure the clutch directly it's 2v and goes down to 1.6v when in use. My wires are about 1 1/2 to 2 feet long, is that acceptable? I did shorten the clutch cable to no effect.

Would it make a difference if my logitech motor cable is very long? It's under the seat in my cab while the L2M2 is behind the wheel.

Any ideas?  :'(

16
Simulateurs / Brancher un volant Sega Model 1 ou 2 sur un driving force Logitech
« le: Dimanche 20 Décembre 2009, 15:08:59 pm »
Ah thank you  <:)

I will check back later then once it's tested, although I can etch my own PCBs so I might have a go with it myself  ;)

Pages: [1] 2