Bonjour, j'ai besoin de votre aide sur Demul 0.56. Impossible de le lancer depuis Hyerspin ou Hyperlanuch.
Message d'erreur
AutoHotkey.dll
---------------------------
Error: Call to nonexistent function.
Specifically: StartModule()
Line#
063: MURL = http://demul.emulation64.com/
064: MAuthor = djvj
065: MVersion = 2.0.2
066: MCRC = 6A989154
067: iCRC = 5C9B9311
068: MID = 635038268881325110
069: MSystem = "Sammy Atomiswave","Sega Dreamcast","Sega Naomi"
---> 099: StartModule()
100: FadeInStart()
103: mType := Object("Sammy Atomiswave","atomiswave","Sega Dreamcast","dc","Sega Naomi","naomi")
104: ident := mType[systemName]
105: if !ident
106: ScriptError("Your systemName is: " . Demul. "
It is not one of the known supported systems for this MESS module: " . moduleName)
108: settingsFile := modulePath . "\" . moduleName . ".ini"
109: demulFile := CheckFile(emuPath . "\Demul.ini")
The program will exit.
Mon fichier AHK:
MEmu = Demul
MEmuV = v0.5.6
MURL = http://demul.emulation64.com/
MAuthor = djvj
MVersion = 2.0.2
MCRC = 6A989154
iCRC = 5C9B9311
MID = 635038268881325110
MSystem = "Sammy Atomiswave","Sega Dreamcast","Sega Naomi"
;----------------------------------------------------------------------------
; Notes:
; Required - control and nvram files can be found in my user dir on the FTP at /Upload Here/djvj/Sega Naomi\Emulators. Additonal instructions from my orignal HL1.0 script at http://www.hyperspin-fe.com/forum/showpost.php?p=86093&postcount=104
; Required - moduleName ini: can be found in my user dir on the FTP at /Upload Here/djvj/Sega Naomi\Modules\Sega Naomi
; moduleName ini must be placed in same folder as this module
; GDI images must match mame zip names and be extracted and have a .dat extension
; Rom_Extension should be zip
;
; Place the naomi.zip bios archive in the demul\roms subdir
; Set your Video Plugin to gpuOglv3 and set your desired resolution there
; In case your control codes do not match mine, set your desired control type in demul, then open the demul.ini and find section PORTB and look for the device key. Use this number instead of the one I provided
;
; Controls:
; Start a game of each control type (look in the moduleName ini for these types) and configure your controls to play the game. Copy paste the JAMMA0_0 and JAMMA0_1 (for naomi) or the ATOMISWAVE0_0 and ATOMISWAVE0_1 (for atomiswave) sections into the moduleName ini under the matching controls section.
;
; Sega Dreamcast:
; This script supports the following DC images: GDI, CDI, CHD, MDS, CCD, NRG, CUE
; Place your dc.zip bios in the roms subdir of your emu
; Run demul manually and goto Config->Plugins->GD-ROM Plugin and set it to gdrImage
; Set your Video Plugin to gpuOglv3
; On first run of a game, demul will ask you to setup all your plugin choices if you haven't already.
; If you want to convert your roms from gdi to chd, see here: http://www.emutalk.net/showthread.php?t=51502
; FileDelete(s) are in the script because sometimes demul will corrupt the ini and make it crash. The script recreates a clean ini for you.
;
; Troubleshooting:
; For some reason demul's ini files can get corrupted and ahk can't read/write to them correctly.
; If your ini keys are not being read or not writing to their existing keys in the demul inis, create a new file and copy/paste everything from the old ini into the new one and save.
; If you use Fade_Out, the module will force close demul because you cannot send ALT+F4 to demul if another GUI is covering it. Otherwise demul should close cleanly when Fade_Out is disabled. I suggest keeping Fade_Out disabled if you use this emu.
;----------------------------------------------------------------------------
StartModule()
FadeInStart()
; This object controls how the module reacts to different systems. Demul can play a few systems, but needs to know what system you want to run, so this module has to adapt.
mType := Object("Sammy Atomiswave","atomiswave","Sega Dreamcast","dc","Sega Naomi","naomi")
ident := mType[systemName] ; search object for the systemName identifier MESS uses
If !ident
ScriptError("Your systemName is: " . Demul. "`nIt is not one of the known supported systems for this MESS module: " . moduleName)
settingsFile := modulePath . "\" . moduleName . ".ini"
demulFile := CheckFile(emuPath . "\Demul.ini")
padFile := CheckFile(emuPath . "\padDemul.ini")
controls := IniReadCheck(settingsFile, romname, "controls","standard",,1) ; have to read this first so the below loop works
; Read all the keys from the moduleName ini. Format is:
; Section, Key, Default Value, unique var
iniLookup =
( ltrim c
Settings, Fullscreen, true
Settings, ControllerCode, 16777216
Settings, MouseCode, 131072
Settings, KeyboardCode, 1073741824
Settings, LightgunCode, -2147483648
Settings, LastControlUsedNaomi, standard
Settings, LastControlUsedAtomiswave, standard
Settings, GlobalShaderEffects, false
Settings, GlobalShaderName
Settings, GlobalShaderMode
%romName%, LoadDecrypted
%romName%, Bios
%romName%, ShaderEffects
%romName%, ShaderName
%romName%, ShaderMode
%controls%_JAMMA0_0, push1,,n_push1_0
%controls%_JAMMA0_0, push2,,n_push2_0
%controls%_JAMMA0_0, push3,,n_push3_0
%controls%_JAMMA0_0, push4,,n_push4_0
%controls%_JAMMA0_0, push5,,n_push5_0
%controls%_JAMMA0_0, push6,,n_push6_0
%controls%_JAMMA0_0, push7,,n_push7_0
%controls%_JAMMA0_0, push8,,n_push8_0
%controls%_JAMMA0_0, SERVICE,,n_service_0
%controls%_JAMMA0_0, START,,n_start_0
%controls%_JAMMA0_0, COIN,,n_coin_0
%controls%_JAMMA0_0, DIGITALUP,,n_digitalup_0
%controls%_JAMMA0_0, DIGITALDOWN,,n_digitaldown_0
%controls%_JAMMA0_0, DIGITALLEFT,,n_digitalleft_0
%controls%_JAMMA0_0, DIGITALRIGHT,,n_digitalright_0
%controls%_JAMMA0_0, ANALOGUP,,n_analogup_0
%controls%_JAMMA0_0, ANALOGDOWN,,n_analogdown_0
%controls%_JAMMA0_0, ANALOGLEFT,,n_analogleft_0
%controls%_JAMMA0_0, ANALOGRIGHT,,n_analogright_0
%controls%_JAMMA0_0, ANALOGUP2,,n_analogup2_0
%controls%_JAMMA0_0, ANALOGDOWN2,,n_analogdown2_0
%controls%_JAMMA0_0, ANALOGLEFT2,,n_analogleft2_0
%controls%_JAMMA0_0, ANALOGRIGHT2,,n_analogright2_0
%controls%_JAMMA0_1, push1,,n_push1_1
%controls%_JAMMA0_1, push2,,n_push2_1
%controls%_JAMMA0_1, push3,,n_push3_1
%controls%_JAMMA0_1, push4,,n_push4_1
%controls%_JAMMA0_1, push5,,n_push5_1
%controls%_JAMMA0_1, push6,,n_push6_1
%controls%_JAMMA0_1, push7,,n_push7_1
%controls%_JAMMA0_1, push8,,n_push8_1
%controls%_JAMMA0_1, SERVICE,,n_service_1
%controls%_JAMMA0_1, START,,n_start_1
%controls%_JAMMA0_1, COIN,,n_coin_1
%controls%_JAMMA0_1, DIGITALUP,,n_digitalup_1
%controls%_JAMMA0_1, DIGITALDOWN,,n_digitaldown_1
%controls%_JAMMA0_1, DIGITALLEFT,,n_digitalleft_1
%controls%_JAMMA0_1, DIGITALRIGHT,,n_digitalright_1
%controls%_JAMMA0_1, ANALOGUP,,n_analogup_1
%controls%_JAMMA0_1, ANALOGDOWN,,n_analogdown_1
%controls%_JAMMA0_1, ANALOGLEFT,,n_analogleft_1
%controls%_JAMMA0_1, ANALOGRIGHT,,n_analogright_1
%controls%_JAMMA0_1, ANALOGUP2,,n_analogup2_1
%controls%_JAMMA0_1, ANALOGDOWN2,,n_analogdown2_1
%controls%_JAMMA0_1, ANALOGLEFT2,,n_analogleft2_1
%controls%_JAMMA0_1, ANALOGRIGHT2,,n_analogright2_1
%controls%_ATOMISWAVE0_0, UP,,a_up_0
%controls%_ATOMISWAVE0_0, DOWN,,a_down_0
%controls%_ATOMISWAVE0_0, LEFT,,a_left_0
%controls%_ATOMISWAVE0_0, RIGHT,,a_right_0
%controls%_ATOMISWAVE0_0, SHOT1,,a_shot1_0
%controls%_ATOMISWAVE0_0, SHOT2,,a_shot2_0
%controls%_ATOMISWAVE0_0, SHOT3,,a_shot3_0
%controls%_ATOMISWAVE0_0, SHOT4,,a_shot4_0
%controls%_ATOMISWAVE0_0, SHOT5,,a_shot5_0
%controls%_ATOMISWAVE0_0, START,,a_start_0
%controls%_ATOMISWAVE0_0, COIN,,a_coin_0
%controls%_ATOMISWAVE0_1, UP,,a_up_1
%controls%_ATOMISWAVE0_1, DOWN,,a_down_1
%controls%_ATOMISWAVE0_1, LEFT,,a_left_1
%controls%_ATOMISWAVE0_1, RIGHT,,a_right_1
%controls%_ATOMISWAVE0_1, SHOT1,,a_shot1_1
%controls%_ATOMISWAVE0_1, SHOT2,,a_shot2_1
%controls%_ATOMISWAVE0_1, SHOT3,,a_shot3_1
%controls%_ATOMISWAVE0_1, SHOT4,,a_shot4_1
%controls%_ATOMISWAVE0_1, SHOT5,,a_shot5_1
%controls%_ATOMISWAVE0_1, START,,a_start_1
%controls%_ATOMISWAVE0_1, COIN,,a_coin_1
)
Loop, Parse, iniLookup, `n
{
StringSplit, split, A_LoopField, `,, %A_Space%%A_Tab%
If split4
%split4% := IniReadCheck(settingsFile, split1, split2,split3,,1)
Else
%split2% := IniReadCheck(settingsFile, split1, split2,split3,,1)
; need to empty the vars for the next loop otherwise they will still have values from the previous loop
split3:=
split4:=
}
; Now compare global & rom keys to get final value
shaderEffects := If (ShaderEffects = "" or ShaderEffects = "ERROR") ? GlobalShaderEffects : ShaderEffects
shaderName := If (ShaderName = "" or ShaderName = "ERROR") ? GlobalShaderName : ShaderName
shaderMode := If (ShaderMode = "" ShaderMode = "ERROR") ? GlobalShaderMode : ShaderMode
; Shader Effects
gpuOglv3File := CheckFile(emuPath . "\gpuOglv3.ini","Shaders are only supported using the gpuOglv3 plugin. Cannot find " . emuPath . "\gpuOglv3.ini")
IniRead, currentShaderValue, %gpuOglv3File%, shader, effects
If shaderEffects = true
{
shaderPath := emupath . "\shaders" ; define the path to the shaders
CheckFile(shaderPath . "\" . shaderName . ".slf") ; make sure the shader exists
If currentShaderValue = false
IniWrite, true, %gpuOglv3File%, shader, effects
IniWrite, %shaderMode%, %gpuOglv3File%, shader, mode
IniWrite, %shaderPath%, %gpuOglv3File%, shader, path
IniWrite, %shaderName%, %gpuOglv3File%, shader, name
}Else If ( shaderEffects != "true" and currentShaderValue = "true" )
IniWrite, false, %gpuOglv3File%, shader, effects
If ident = dc
{
7z(romPath, romName, romExtension, 7zExtractPath)
If ( romExtension = ".cdi" || romExtension = ".mds" || romExtension = ".ccd" || romExtension = ".nrg" || romExtension = ".gdi" || romExtension = ".cue" ) {
gdrImageFile := CheckFile(emuPath . "\gdrImage.ini")
FileDelete, %gdrImageFile%
Sleep, 500
IniWrite, gdrImage.dll, %demulFile%, plugins, gdr
IniWrite, false, %gdrImageFile%, Main, openDialog
IniWrite, %romPath%\%romName%%romExtension%, %gdrImageFile%, Main, imagefilename
} Else If romExtension = .chd
{
gdrCHDFile := CheckFile(emuPath . "\gdrCHD.ini")
FileDelete, %gdrCHDFile%
Sleep, 500
IniWrite, false, %gdrCHDFile%, Main, openDialog
IniWrite, gdrCHD.dll, %demulFile%, plugins, gdr
IniWrite, %romPath%\%romName%%romExtension%, %gdrCHDFile%, Main, imagefilename
} Else
ScriptError(romExtension . " is not a supported file type for this " . moduleName . " module.")
IniWrite, 1, %demulFile%, main, region ; Set BIOS to Auto Region
} Else { ; all other systems, Naomi and Atomiswave
; This updates the demul.ini with your Bios choice for the selected rom
If ( Bios != "" and Bios != "ERROR" ) {
Bios := RegExReplace(Bios,"\s.*") ; Cleans off the added text from the key's value so only the number is left
IniWrite, false, %demulFile%, main, naomiBiosAuto ; turning auto bios off so we can use a specific one instead
IniWrite, %Bios%, %demulFile%, main, naomiBios ; setting specific bios user has set from the moduleName ini
} Else
IniWrite, true, %demulFile%, main, naomiBiosAuto ; turning auto bios on if user did not specify a specific one
; This section writes your custom keys to the padDemul.ini. Naomi games had many control panel layouts. The only way we can accomodate these differing controls, is to keep track of them all and write them to the ini at the launch of each game.
; First we check if the last controls used are the same as the game we want to play, so we don't waste time updating the ini if it is not necessary. For example playing 2 sfstyle type games in a row, we wouldn't need to write to the ini.
; This section tells demul what arcade control type should be connected to the game. Options are standard (aka controller), mouse, lightgun, or keyboard
If ( controls = "lightgun" || controls = "mouse" )
IniWrite, %MouseCode%, %demulFile%, PORTB, device
Else If ( controls = "keyboard" )
IniWrite, %KeyboardCode%, %demulFile%, PORTB, device
Else ; accounts for all other control types
IniWrite, %ControllerCode%, %demulFile%, PORTB, device
LastControlUsed := If (ident = "atomiswave")?(LastControlUsedAtomiswave):(LastControlUsedNaomi) ; find out last controls used for the system we are launching
If ( LastControlUsed != controls ) {
If ident = atomiswave
{
WriteAtomiswaveControls(padFile, 0,a_shot1_0,a_shot2_0,a_shot3_0,a_shot4_0,a_shot5_0,a_start_0,a_coin_0,a_up_0,a_down_0,a_left_0,a_right_0)
WriteAtomiswaveControls(padFile, 1,a_shot1_1,a_shot2_1,a_shot3_1,a_shot4_1,a_shot5_1,a_start_1,a_coin_1,a_up_1,a_down_1,a_left_1,a_right_1)
IniWrite, %controls%, %settingsFile%, Settings, LastControlUsedAtomiswave ; write control loaded to the ini so we know what we used last for next launch
} Else {
WriteNaomiControls(padFile, 0,n_push1_0,n_push2_0,n_push3_0,n_push4_0,n_push5_0,n_push6_0,n_push7_0,n_push8_0,n_service_0,n_start_0,n_coin_0,n_digitalup_0,n_digitaldown_0,n_digitalleft_0,n_digitalright_0,n_analogup_0,n_analogdown_0,n_analogleft_0,n_analogright_0,n_analogup2_0,n_analogdown2_0,n_analogleft2_0,n_analogright2_0)
WriteNaomiControls(padFile, 1,n_push1_1,n_push2_1,n_push3_1,n_push4_1,n_push5_1,n_push6_1,n_push7_1,n_push8_1,n_service_1,n_start_1,n_coin_1,n_digitalup_1,n_digitaldown_1,n_digitalleft_1,n_digitalright_1,n_analogup_1,n_analogdown_1,n_analogleft_1,n_analogright_1,n_analogup2_1,n_analogdown2_1,n_analogleft2_1,n_analogright2_1)
IniWrite, %controls%, %settingsFile%, Settings, LastControlUsedNaomi ; write control loaded to the ini so we know what we used last for next launch
}
}
}
Sleep, 250
; Construct the CLI for demul and send romName if naomi or atomiswave. Dreamcast needs a full path and romName.
If LoadDecrypted = true ; decrypted naomi rom
romCLI := "-customrom=" . """" . romPath . "\" . romName . ".bin"""
Else If ident = dc ; dreamcast game
romCLI := " -rom=" . """" . romPath . "\" . romName . romExtension . """"
Else ; standard naomi rom
romCLI := "-rom=" . romName
Run(executable . " -run=" . ident . " " . romCLI, emuPath,, emuPID)
; Sleep, 1000 ; need a second for demul to launch, increase if yours takes longer and the emu is appearing too soon
Loop { ; looping until demul is done loading rom and gpu starts showing frames
Sleep, 200
WinGetTitle, winTitle, ahk_class window
StringSplit, winTextSplit, winTitle, %A_Space%
If ( winTextSplit5 = "gpu:" And winTextSplit6 = "0" )
Break
}
WinActivate ahk_class window
If fullscreen = true
Send !{ENTER} ; go fullscreen
FadeInExit()
If systemName contains Dreamcast,DC
7zCleanUp()
Process("WaitClose", executable)
FadeOutExit()
ExitModule()
; Write new naomi controls to padDemul.ini
WriteNaomiControls(file,player,push1,push2,push3,push4,push5,push6,push7,push8,service,start,coin,digitalup,digitaldown,digitalleft,digitalright,analogup,analogdown,analogleft,analogright,analogup2,analogdown2,analogleft2,analogright2) {
IniWrite, %push1%, %file%, JAMMA0_%player%, PUSH1
IniWrite, %push2%, %file%, JAMMA0_%player%, PUSH2
IniWrite, %push3%, %file%, JAMMA0_%player%, PUSH3
IniWrite, %push4%, %file%, JAMMA0_%player%, PUSH4
IniWrite, %push5%, %file%, JAMMA0_%player%, PUSH5
IniWrite, %push6%, %file%, JAMMA0_%player%, PUSH6
IniWrite, %push7%, %file%, JAMMA0_%player%, PUSH7
IniWrite, %push8%, %file%, JAMMA0_%player%, PUSH8
IniWrite, %service%, %file%, JAMMA0_%player%, SERVICE
IniWrite, %start%, %file%, JAMMA0_%player%, START
IniWrite, %coin%, %file%, JAMMA0_%player%, COIN
IniWrite, %digitalup%, %file%, JAMMA0_%player%, DIGITALUP
IniWrite, %digitaldown%, %file%, JAMMA0_%player%, DIGITALDOWN
IniWrite, %digitalleft%, %file%, JAMMA0_%player%, DIGITALLEFT
IniWrite, %digitalright%, %file%, JAMMA0_%player%, DIGITALRIGHT
IniWrite, %analogup%, %file%, JAMMA0_%player%, ANALOGUP
IniWrite, %analogdown%, %file%, JAMMA0_%player%, ANALOGDOWN
IniWrite, %analogleft%, %file%, JAMMA0_%player%, ANALOGLEFT
IniWrite, %analogright%, %file%, JAMMA0_%player%, ANALOGRIGHT
IniWrite, %analogup2%, %file%, JAMMA0_%player%, ANALOGUP2
IniWrite, %analogdown2%, %file%, JAMMA0_%player%, ANALOGDOWN2
IniWrite, %analogleft2%, %file%, JAMMA0_%player%, ANALOGLEFT2
IniWrite, %analogright2%, %file%, JAMMA0_%player%, ANALOGRIGHT2
}
; Write new atomiswave controls to padDemul.ini
WriteAtomiswaveControls(file,player,shot1,shot2,shot3,shot4,shot5,start,coin,up,down,left,right) {
IniWrite, %shot1%, %file%, ATOMISWAVE0_%player%, SHOT1
IniWrite, %shot2%, %file%, ATOMISWAVE0_%player%, SHOT2
IniWrite, %shot3%, %file%, ATOMISWAVE0_%player%, SHOT3
IniWrite, %shot4%, %file%, ATOMISWAVE0_%player%, SHOT4
IniWrite, %shot5%, %file%, ATOMISWAVE0_%player%, SHOT5
IniWrite, %start%, %file%, ATOMISWAVE0_%player%, START
IniWrite, %coin%, %file%, ATOMISWAVE0_%player%, COIN
IniWrite, %up%, %file%, ATOMISWAVE0_%player%, UP
IniWrite, %down%, %file%, ATOMISWAVE0_%player%, DOWN
IniWrite, %left%, %file%, ATOMISWAVE0_%player%, LEFT
IniWrite, %right%, %file%, ATOMISWAVE0_%player%, RIGHT
}
CloseProcess:
FadeOutStart()
If fadeOut = true ; cannot send ALT+F4 to a background window (controlsend doesn't work), so we have to force close instead.
Process("Close", emuPID) ; we have to close this way otherwise demul crashes with WinClose
Else
Send, !{F4}
Return
Si quelqu'un peut me venir en aide.
|
